Parti

Nessuna parte richiesta.

  1. Flip phone over so its backside is facing up.
    • Flip phone over so its backside is facing up.

  2. Push from indentation and slide battery cover away from phone to remove battery cover.
    • Push from indentation and slide battery cover away from phone to remove battery cover.

  3. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  4. Hold battery upwards so you see “This side up”
    • Hold battery upwards so you see “This side up”

  5. Using a philips screwdriver, unscrew all 4 screws along the edge of the phone
    • Using a philips screwdriver, unscrew all 4 screws along the edge of the phone

  6. Using your plastic pry tool, slide the tool between the phone’s keypad cover and back cover. Using your plastic pry tool, slide the tool between the phone’s keypad cover and back cover.
    • Using your plastic pry tool, slide the tool between the phone’s keypad cover and back cover.

  7. You should be able to see the motherboard. Don’t separate the two covers. They should be held together by a screw at the axis of the phone.
    • You should be able to see the motherboard. Don’t separate the two covers. They should be held together by a screw at the axis of the phone.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Jack Foley

Membro da: 25/04/2013

28 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 13-62, Johann Spring 2013 Membro di Cal Poly, Team 13-62, Johann Spring 2013

CPSU-JOHANN-S13S13G62

4 Membri

12 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 276