Salta al contenuto principale

Gateway SA1 Cooling Fan Replacement

Cosa ti serve

  1. Gateway SA1 Cooling Fan Replacement, Battery: passo 1, immagine 1 di 1
    • Move the latch to the right of the battery to unlock.

  2. Gateway SA1 Cooling Fan Replacement: passo 2, immagine 1 di 1
    • Slide the latch on the left directly below the battery to unlock and pull out the battery as shown.

    • The latch must be held in position to remove the battery.

  3. Gateway SA1 Cooling Fan Replacement, Cooling Fan: passo 3, immagine 1 di 2 Gateway SA1 Cooling Fan Replacement, Cooling Fan: passo 3, immagine 2 di 2
    • Unscrew the indicated Philips screw.

    • Screw cannot be completely removed from cover.

  4. Gateway SA1 Cooling Fan Replacement: passo 4, immagine 1 di 1
    • Use the spudger to pry open the cover.

    • There will be three tabs on each side except for the side with the screw.

  5. Gateway SA1 Cooling Fan Replacement: passo 5, immagine 1 di 2 Gateway SA1 Cooling Fan Replacement: passo 5, immagine 2 di 2
    • Unscrew the six indicated Philips screws.

    • These screws cannot be completely removed from the cooling fan component.

  6. Gateway SA1 Cooling Fan Replacement: passo 6, immagine 1 di 1
    • Unplug the shown cable attaching the cooling fan to the computer.

  7. Gateway SA1 Cooling Fan Replacement: passo 7, immagine 1 di 1
    • You are now able to remove the cooling fan.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 6 persone hanno completato questa guida.

Team

Cal Poly, Team 24-20, Regan Spring 2010 Membro di Cal Poly, Team 24-20, Regan Spring 2010

CPSU-REGAN-S10S24G20

4 Membri

14 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 13,430