Salta al contenuto principale

Introduzione

This guide will show you how to replace your laptop's hard drive.

Parti

Nessuna parte specificata.

  1. Unscrew all .5mm screws from the back rectangular panel. Use a J0 screwdriver.
    • Unscrew all .5mm screws from the back rectangular panel. Use a J0 screwdriver.

    • Screws will not come out all the way out. Simply unscrew until they do not come out any further.

  2. Firmly press with your hand on the silver surface and pull back, dislodging the hard drive from its port. Firmly press with your hand on the silver surface and pull back, dislodging the hard drive from its port.
    • Firmly press with your hand on the silver surface and pull back, dislodging the hard drive from its port.

  3. Remove the four 1.2mm screws attaching the case to the hard drive. Use the same J0 screwdriver.
    • Remove the four 1.2mm screws attaching the case to the hard drive. Use the same J0 screwdriver.

  4. Pull out the old hard drive.
    • Pull out the old hard drive.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Emily Pendleton

Membro da: 06/11/2017

401 Reputazione

4 Guide realizzate

Team

Baylor, Team S8-G6, Johnson Fall 2017 Membro di Baylor, Team S8-G6, Johnson Fall 2017

BU-JOHNSON-F17S8G6

2 Membri

4 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 70