Aggiusta la tua roba Comunità Store

Gateway MA6 Laptop Cooling Assembly Replacement

Scritto Da: Chris Naughton (e 5 altri collaboratori)
  • Commenti: 0
  • Preferiti: 0
  • Completamenti: 2

Difficoltà

Moderato

Passi

5

Tempo Necessario

15 minuti

Sezioni

1

Contrassegni

1

Missed a Step

Passo Mancante

Oops! A questa guida al momento mancano alcuni passi importanti.

Introduzione

The cooling assembly is made up of a cooling fan and a large piece of copper to help dissipate heat out of the bottom of your laptop. Over time, the fan can wear out and it will need to be replaced.

Strumenti

Ricambi

Nessuna parte specificata.

  1. Loosen the seven 6 mm Phillips #0 screws on the back of the case. Leave all the screws in the back plate and so you don't lose them.

    • Loosen the seven 6 mm Phillips #0 screws on the back of the case.

    • Leave all the screws in the back plate and so you don't lose them.

    Modifica

  2. Pull upwards on the top of the back cover to remove it. Pull upwards on the top of the back cover to remove it.

    • Pull upwards on the top of the back cover to remove it.

    Modifica

  4. Remove the four 9 mm Phillips #0 screws from the cooling assembly.

    • Remove the four 9 mm Phillips #0 screws from the cooling assembly.

    Modifica

  5. Gently and carefully remove the cooling assembly to avoid ripping the wire attaching it to the computer. Gently flip the cooling fan assembly upside-down on the computer surface. Carefully grab the wire attached to the computer and pull away from the port.

    • Gently and carefully remove the cooling assembly to avoid ripping the wire attaching it to the computer.

    • Gently flip the cooling fan assembly upside-down on the computer surface.

    • Carefully grab the wire attached to the computer and pull away from the port.

    • The cooling fan is now safe for removal.

    Modifica

  6. When reinstalling heat sink and fans clean off the old thermal paste from both the heat sink and the CPU and then add new paste to CPU

    • When reinstalling heat sink and fans clean off the old thermal paste from both the heat sink and the CPU and then add new paste to CPU

    • If your unfamiliar with applying thermal paste Come applicare la Pasta Termica

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Autore

con 5 altri collaboratori

Chris Naughton

Membro da: 07/04/2014

705 Reputazione

5 Guide realizzate

Distintivi: 11

+8 altri distintivi

Team

Cal Poly, Team 6-2, Forte Spring 2014 Membro di Cal Poly, Team 6-2, Forte Spring 2014

CPSU-FORTE-S14S6G2

5 Membri

20 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 7

Tutti i Tempi: 584