Introduzione

The RAM can be replaced if you have a Phillips #0 screwdriver.

Parti

Nessuna parte richiesta.

  1. Unlock the tab located in the top left corner of the netbook.
    • Unlock the tab located in the top left corner of the netbook.

    • The red tab indicated that the battery has been properly unlocked.

    • Remove the battery.

    • When working with electronics, it is always wise to remove the power source before taking the device apart.

    Aggiungi Commento

  2. The RAM is located under this cover.
    • The RAM is located under this cover.

    Aggiungi Commento

  3. Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    • Using a Phillips #0 screwdriver, remove one (1) 5mm screw holding the cover in place.

    • Use a plastic opening tool to remove the cover.

    Aggiungi Commento

    • Unlock the RAM by pinching the metal clamps that keep the RAM in place.

    • Remove the RAM while the metal clamps are disengaged.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Lydia Benjock

Membro da: 18/10/2013

1.189 Reputazione

10 Guide realizzate

Team

Clemson, Team 14-3, Benson Fall 2013 Membro di Clemson, Team 14-3, Benson Fall 2013

CLEM-BENSON-F13S14G3

3 Membri

22 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 7

Tutti i Tempi: 1,628