Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Cosa ti serve
-
-
Carefully remove entire ceramic briquette casing from above the stainless steel burner.
-
-
-
Locate the six screws located on top of the ceramic briquette casing and unscrew them using your phillips head screwdriver.
-
-
-
-
Using your hands, gently unscrew washers from the back of the casing.
-
-
-
Separate the front and back metal casings surrounding the briquettes.
-
-
-
Take out old and used briquettes and dispose of them. (They will probably be black and tarnished)
-
-
-
Take 16 new ceramic briquettes out and carefully align them inside of the casing. Be sure to pay attention to where you place them, as some should be straight and some diagonal for the casing to close back correctly.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 3 persone hanno completato questa guida.