Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Garmin Vivoactive HR Display Replacement

Cosa ti serve

  1. Garmin Vivoactive HR Display Replacement, Display: passo 1, immagine 1 di 1
    • Apply the Heated iOpener to the display for 30 seconds to soften the adhesive..

  2. Garmin Vivoactive HR Display Replacement: passo 2, immagine 1 di 1
    • Insert a spudger between the display and watch body.

    • Pry upwards and work the spudger around the perimeter of the display to free it from the body.

    • The display is still attached with ribbon cables so don't remove completely.

  3. Garmin Vivoactive HR Display Replacement: passo 3, immagine 1 di 1
    • Lift the touchscreen to expose ribbon cables that connect it to the main circuit board.

  4. Garmin Vivoactive HR Display Replacement: passo 4, immagine 1 di 2 Garmin Vivoactive HR Display Replacement: passo 4, immagine 2 di 2
    • Use the flat end of a spudger to disconnect the display cable press connectors from the motherboard.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 16 persone hanno completato questa guida.

Chris Corry

Membro da: 07/05/18

256 Reputazione

1 Guida realizzata

Team

IUPUI, Team S2-G5, Harley Summer 2018 Membro di IUPUI, Team S2-G5, Harley Summer 2018

IUPUI-HARLEY-SU18S2G5

3 Membri

3 Guide realizzate

19 Commenti

Hello,

thanks for this. Where can i buy the new screen?

Bowland Olan - Replica

Nice guide! Thanks. But I can’t find any parts to repair my watch

Christoph Freydank - Replica

Yeah, where can we get the parts from? Also how hard is it to change the battery? Thanks for your help :)

Rick - Replica

What type of glue i use to connect the display an the body?

culibrkboj - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 18

Ultimi 30 Giorni: 74

Tutti i Tempi: 25,667