Introduzione

This guide uses the iOpener and black spudger to remove the broken screen from the device, allowing for replacement. Screen replacement will compromise waterproof integrity.

Parti

Nessuna parte richiesta.

Apply the Heated iOpener to the display for 30 seconds to soften the adhesive..
  • Apply the Heated iOpener to the display for 30 seconds to soften the adhesive..

Aggiungi Commento

Insert a spudger between the display and watch body.
  • Insert a spudger between the display and watch body.

  • Pry upwards and work the spudger around the perimeter of the display to free it from the body.

  • The display is still attached with ribbon cables so don't remove completely.

Aggiungi Commento

  • Lift the touchscreen to expose ribbon cables that connect it to the main circuit board.

Aggiungi Commento

  • Use the flat end of a spudger to disconnect the display cable press connectors from the motherboard.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Chris Corry

Membro da: 05/07/2018

109 Reputazione

1 Guida realizzata

Team

IUPUI, Team S2-G5, Harley Summer 2018 Membro di IUPUI, Team S2-G5, Harley Summer 2018

IUPUI-HARLEY-SU18S2G5

3 Membri

2 Guide realizzate

Hello,

thanks for this. Where can i buy the new screen?

Bowland Olan - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 26

Ultimi 7 Giorni: 104

Ultimi 30 Giorni: 324

Tutti i Tempi: 387