Salta al contenuto principale

Introduzione

If your power button is defective, replace the old one with the new power button.

  1. Remove the barcode sticker at the bottom of the device.
    • Remove the barcode sticker at the bottom of the device.

  2. Remove two 8.4 mm T5 screws from the bottom of the device.
    • Remove two 8.4 mm T5 screws from the bottom of the device.

  3. Kit di riparazione batterie iPhone

    Solo $29.99

    Buy Now

    Kit di riparazione batterie iPhone

    Solo $29.99

    Buy Now
  4. Using a plastic opening tool, carefully pry open the device. Open the device carefully, making sure not to damage the gold ribbon cable that connects the screen to the motherboard.
    • Using a plastic opening tool, carefully pry open the device.

    • Open the device carefully, making sure not to damage the gold ribbon cable that connects the screen to the motherboard.

  5. Remove the power button. Remove the power button.
    • Remove the power button.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Timothy

Membro da: 26/01/2012

44 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 9-3, Regan Winter 2012 Membro di Cal Poly, Team 9-3, Regan Winter 2012

CPSU-REGAN-W12S9G3

5 Membri

4 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 7

Ultimi 30 Giorni: 19

Tutti i Tempi: 9,256