Introduzione

The gasket can break and become unusable, compromising the protection of the internal structure of device and rendering it vulnerable to water. This guide will aid you in its removal and replacement.

Parti

Nessuna parte richiesta.

  1. Lift and twist the battery cover release  90 degrees counterclockwise on the back of the device.
    • Lift and twist the battery cover release 90 degrees counterclockwise on the back of the device.

  2. Lift battery release up to remove battery cover.
    • Lift battery release up to remove battery cover.

  3. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  4. Pull AA batteries out. Pull AA batteries out.
    • Pull AA batteries out.

  5. Remove the six 10 mm screws on the back of the device  with a  Phillips #0 Screwdriver. Separate the back panel from the front.
    • Remove the six 10 mm screws on the back of the device with a Phillips #0 Screwdriver.

    • Separate the back panel from the front.

  6. Remove the gasket. Be careful to make sure the gasket is aligned correctly to ensure it is water proof.
    • Remove the gasket.

    • Be careful to make sure the gasket is aligned correctly to ensure it is water proof.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 7

Ultimi 30 Giorni: 29

Tutti i Tempi: 359