Introduzione

The motherboard is an essential component of any electronic device. Always use caution when working on these components.

  1. Power off your watch before disassembling it.
    • Power off your watch before disassembling it.

    • Place the watch on a hard surface with the screen facing down.

    • Unscrew the four 7.0 mm screws located at each corner using a T5 screwdriver.

  2. Pry the old battery out using a plastic spudger.
    • Pry the old battery out using a plastic spudger.

  3. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  4. Unscrew the two T4 6 mm screws located on both sides of the motherboard.
    • Unscrew the two T4 6 mm screws located on both sides of the motherboard.

  5. Lift the motherboard up using a plastic spudger.
    • Lift the motherboard up using a plastic spudger.

    • Ribbon cables are still attached underneath—be careful when prying the motherboard up.

  6. Flip the ZIF connectors using a plastic spudger tool.
    • Flip the ZIF connectors using a plastic spudger tool.

    • Remove the motherboard.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Dustin Persohn

Membro da: 21/03/2018

208 Reputazione

2 Guide realizzate

Team

IUPUI, Team S5-G3, Baechle Spring 2018 Membro di IUPUI, Team S5-G3, Baechle Spring 2018

IUPUI-BAECHLE-S18S5G3

3 Membri

3 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 11

Tutti i Tempi: 154