Aggiusta la tua roba

Diritto alla Riparazione

Store

Garmin Fenix 3 HR Motherboard Replacement

Scritto Da: Jacob Smiley (e 2 altri collaboratori)
  • Commenti: 3
  • Preferiti: 0
  • Completamenti: 5

Difficoltà

Moderato

Passi

8

Tempo Necessario

Suggerisci un tempo??

Sezioni

1

Contrassegni

1

Missing Details

Dettagli Mancanti

Alcuni dettagli di questa guida sono mancanti. Aiuta gli utenti aggiungendo strumenti, livello di difficoltà o tempo di esecuzione.

Introduzione

This guide will give you all the necessary steps to change your old motherboard for a new one.

  1. Remove the five 7mm screws with H1.3 hex screwdriver. Remove the five 7mm screws with H1.3 hex screwdriver.

    • Remove the five 7mm screws with H1.3 hex screwdriver.

    Modifica

  2. Use a plastic opening tool to remove the face of the device to expose the inner components. There is one metal piece at the top of the face that is loose. This is the GPS antenna which will need to be removed as well.

    • Use a plastic opening tool to remove the face of the device to expose the inner components.

    • There is one metal piece at the top of the face that is loose. This is the GPS antenna which will need to be removed as well.

    • Be careful of the ribbon that connects the motherboard to the display.

    Modifica

  3. Disconnect this ribbon from the motherboard using tweezers.

    • Disconnect this ribbon from the motherboard using tweezers.

    Modifica

  5. Using a T5 screwdriver, remove the two 5mm screws. The motherboard should move freely.

    • Using a T5 screwdriver, remove the two 5mm screws.

    • The motherboard should move freely.

    Modifica

  6. Another ribbon is attached from the underside of the motherboard. Disconnect this ribbon.

    • Another ribbon is attached from the underside of the motherboard. Disconnect this ribbon.

    Modifica

  7. Disconnect wires connecting battery to motherboard.

    • Disconnect wires connecting battery to motherboard.

    Modifica

  8. The battery is glued to the motherboard and will need pried off with a nylon spudger.

    • The battery is glued to the motherboard and will need pried off with a nylon spudger.

    Modifica

  9. Now attach battery to new motherboard and reassemble.

    • Now attach battery to new motherboard and reassemble.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

Autore

con 2 altri collaboratori

Jacob Smiley

Membro da: 26/03/2018

277 Reputazione

1 Guida realizzata

Distintivi: 5

+2 altri distintivi

Team

IUPUI, Team S1-G6, Harley Spring 2018 Membro di IUPUI, Team S1-G6, Harley Spring 2018

IUPUI-HARLEY-S18S1G6

3 Membri

2 Guide realizzate

2 Commenti

Aggiungi un commento

And where would one source replacement motherboard?

jonathan.hatchuel - Replica

donde puedo encontras placa.madre reeemplazo????

luis zavala - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 11

Ultimi 30 Giorni: 60

Tutti i Tempi: 3,355