Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
Be very careful when handling connector wires, as they are incredibly easily broken. This guide is unique only in removing the circuit board from the screen.
Cosa ti serve
-
-
Remove the six T5 Torx 6.32mm screws securing the back cover to the watch.
-
-
Passo 3 Water Proof Gasket
Attenzione: il passaggio 3 proviene da una guida contrassegnata come in corso.
-
Remove the orange gasket.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.