Aggiusta la tua roba

Diritto alla Riparazione

Store

Garmin Approach S2 Motherboard Replacement

Scritto Da: Evan Miller (e un altro collaboratore)
  • Commenti: 0
  • Preferiti: 0

Difficoltà

Moderato

Passi

10

Tempo Necessario

25 - 30 minuti

Sezioni

4

Contrassegni

4

In Progress

In Lavorazione

Questa guida è un work in progress. Ricarica periodicamente per vedere le ultime modifiche!

Needs More Images

Necessarie Più Immagini

Con poche altre immagini, le procedure illustrate in questa guida sarebbero chiarissime.

Missed a Step

Passo Mancante

Oops! A questa guida al momento mancano alcuni passi importanti.

Incorrect Tools

Attrezzi Non Corretti

Contribuisci a rendere migliore questa guida usando i giusti strumenti nelle immagini e/o nel testo.

Introduzione

Be very careful when handling connector wires, as they are incredibly easily broken. This guide is unique only in removing the circuit board from the screen.

Strumenti

Acquista questi strumenti

Parti

Nessuna parte specificata.

  1. Remove the six T5 Torx 6.32mm screws securing the back cover to the watch. Remove the six T5 Torx 6.32mm screws securing the back cover to the watch.

    • Remove the six T5 Torx 6.32mm screws securing the back cover to the watch.

    Modifica

  2. Remove the back cover carefully.

    • Remove the back cover carefully.

    • Even after the screws have been removed, the back cover can still be quite difficult to take off. Moderate to extensive prying may be required. Be gentle, but firm.

    Modifica

  3. Remove the orange gasket.

    • Remove the orange gasket.

    Modifica

  4. Remove the screen and motherboard assembly from the case.

    • Remove the screen and motherboard assembly from the case.

    Modifica

  5. The Essential Toolkit

    The most helpful tools in our most compact kit.

    Acquista ora

    The Essential Toolkit

    The most helpful tools in our most compact kit.

    Acquista ora

  6. Use a metal spudger to remove the golden retaining clip from the screen. There will be some adhesive to break.

    • Use a metal spudger to remove the golden retaining clip from the screen. There will be some adhesive to break.

    Modifica

  7. Remove the screen from the golden metal clip.

    • Remove the screen from the golden metal clip.

    Modifica

  8. Unhinge the black retaining hinge by prying it open with the metal spudger; Your fingernails will work as well.

    • Unhinge the black retaining hinge by prying it open with the metal spudger; Your fingernails will work as well.

    Modifica

  9. Remove the connector from the motherboard by pulling it free at the base. Make sure to pull from the base of the connector wire, as it is very easy to rip the wire from the screen.

    • Remove the connector from the motherboard by pulling it free at the base.

    • Make sure to pull from the base of the connector wire, as it is very easy to rip the wire from the screen.

    Modifica

  10. Remove the screen from the motherboard.

    • Remove the screen from the motherboard.

    • Notice our tape retaining the connector to the screen. This is so easy to rip!

    Modifica

  11. Remove the motherboard from the screen.

    • Remove the motherboard from the screen.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 1 altro collaboratore

Evan Miller

Membro da: 21/03/2018

217 Reputazione

2 Guide realizzate

Distintivi: 5

+2 altri distintivi

Team

IUPUI, Team S4-G1, Baechle Spring 2018 Membro di IUPUI, Team S4-G1, Baechle Spring 2018

IUPUI-BAECHLE-S18S4G1

3 Membri

3 Guide realizzate

0 Commenti

Aggiungi un commento

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 11

Tutti i Tempi: 318