Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Game Boy Micro Battery Cover Replacement

Cosa ti serve

  1. Game Boy Micro Battery Cover Replacement, Battery Cover: passo 1, immagine 1 di 3 Game Boy Micro Battery Cover Replacement, Battery Cover: passo 1, immagine 2 di 3 Game Boy Micro Battery Cover Replacement, Battery Cover: passo 1, immagine 3 di 3
    • Remove the Phillips #00 screw on the side of the Game Boy closest to the directional pad.

    • Once the screw has been loosened, lift the cover off the back of the device.

  2. Game Boy Micro Battery Cover Replacement: passo 2, immagine 1 di 3 Game Boy Micro Battery Cover Replacement: passo 2, immagine 2 di 3 Game Boy Micro Battery Cover Replacement: passo 2, immagine 3 di 3
    • Once the back cover is removed, you should see that the battery is connected to the device by two wires and a plastic connector.

    • Gently grab the wires.

  3. Game Boy Micro Battery Cover Replacement: passo 3, immagine 1 di 2 Game Boy Micro Battery Cover Replacement: passo 3, immagine 2 di 2
    • Carefully pull the wires until the connector comes out of the device.

    • Be careful! Don't pull too hard, or you may rip the wires out from the connector.

    • When putting the battery back into the device, make sure the connector is put in exactly the way it came out.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 12 persone hanno completato questa guida.

Jack

Membro da: 01/21/10

396 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 8-46, Regan Winter 2010 Membro di Cal Poly, Team 8-46, Regan Winter 2010

CPSU-REGAN-W10S8G46

5 Membri

25 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 15

Ultimi 30 Giorni: 68

Tutti i Tempi: 15,405