Salta al contenuto principale

Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.

Cosa ti serve

  1. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 1, immagine 1 di 2 : passo 1, immagine 2 di 2
    • Locate the battery compartment on the back of the Game Boy Color.

    • Push down on the tab and hinge the cover downwards and outwards to remove the battery cover.

  2. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 2, immagine 1 di 1
    • Remove the batteries from the battery compartment.

  3. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 3, immagine 1 di 1
    • Carefully slide a razor blade under one of the corners of the screen cover.

  4. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 4, immagine 1 di 1
    • Carefully lift up on the corner of the screen until you can grab the corner with your fingers.

    • Continue gently pulling up on the cover until it is fully removed.

Linea Traguardo

Altre 23 persone hanno completato questa guida.

Team

Cal Poly, Team 19-47, Regan Winter 2013 Membro di Cal Poly, Team 19-47, Regan Winter 2013

CPSU-REGAN-W13S19G47

4 Membri

56 Guide realizzate

4 Commenti

bro, you mustn't to dismount the console to only remove the old lend

sdfsafas - Replica

You only need step 7 and 8.

h027299c - Replica

An alternative method is to in step 7 insert a small screwdriver into the hole in the front shell where the power light goes through and push off the screen enough to pry it off with your hands. Thereby avoiding this razor-near-the-screen business. You will also most likely need some alcohol (or similar) to loosen the residue leftover from the old screen.

Nick G - Replica

Yes that's true! I've seen repair videos where they do it the way you mentioned, much less of a headache

David Hannum -

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 7

Ultimi 7 Giorni: 39

Ultimi 30 Giorni: 202

Tutti i Tempi: 21,839