Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Game Boy Color Power LED Replacement

Introduzione

This guide will show you how to repair the Game Boy Color's power LED. The power led glows red when the device is turned on indicating that it is receiving power.

Cosa ti serve

  1. Game Boy Color Power LED Replacement, Battery: passo 1, immagine 1 di 2 Game Boy Color Power LED Replacement, Battery: passo 1, immagine 2 di 2

    • Locate the battery compartment on the back of the Game Boy Color.

    • Push down on the tab and hinge the cover downwards and outwards to remove the battery cover.

    Traduci

  2. Game Boy Color Power LED Replacement: passo 2, immagine 1 di 1

    • Remove the batteries from the battery compartment.

    Traduci

  3. Game Boy Color Power LED Replacement, Back Housing: passo 3, immagine 1 di 1

    • Using a Y1 screwdriver, remove the six screws on the back of the device as pictured. The bottom two screws are located inside of the battery compartment.

    Traduci

  4. Game Boy Color Power LED Replacement: passo 4, immagine 1 di 2 Game Boy Color Power LED Replacement: passo 4, immagine 2 di 2

    • Gently lift and separate the back housing from the rest of the device. Now you've got the back housing out!

    Traduci

  6. Game Boy Color Power LED Replacement, Motherboard: passo 5, immagine 1 di 2 Game Boy Color Power LED Replacement, Motherboard: passo 5, immagine 2 di 2

    • Using the Phillips #1 screwdriver, remove the 3 screws shown in the picture.

    Traduci

  7. Game Boy Color Power LED Replacement: passo 6, immagine 1 di 1

    • Gently lift the motherboard from the front housing.

    Traduci

  8. Game Boy Color Power LED Replacement, Power LED: passo 7, immagine 1 di 2 Game Boy Color Power LED Replacement, Power LED: passo 7, immagine 2 di 2
    Traduci

  9. Game Boy Color Power LED Replacement: passo 8, immagine 1 di 1

    • Insert new LED into the circuit board.

    • Make sure that the LED is in the correct orientation. The longer leg of the LED is the positive end, while the shorter leg is the negative end.

    • The positive lead should go through the hole closest to the edge of the circuit board.

    Traduci

  10. Game Boy Color Power LED Replacement: passo 9, immagine 1 di 1

    • Solder the leads of the new LED to the circuit board.

    Traduci

  11. Game Boy Color Power LED Replacement: passo 10, immagine 1 di 1

    • Cut the excess ends of the LED legs using the wire cutters.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 7 persone hanno completato questa guida.

Autore

con 5 altri collaboratori

Alex Wu

Membro da: 01/11/13

1.446 Reputazione

2 Guide realizzate

Distintivi: 16

+13 altri distintivi

Team

Cal Poly, Team 19-47, Regan Winter 2013 Membro di Cal Poly, Team 19-47, Regan Winter 2013

CPSU-REGAN-W13S19G47

4 Membri

56 Guide realizzate

6 Commenti

what is the brass color looking thing under the soldering iron in step 7?

Soul Divide - Replica

That's called 'Desoldering Braid', it sucks up solder like a wick

John Smith -

and what kind of LED are you using to replace?

Soul Divide - Replica

This was great! Exactly what I needed with this. My GBC is looking good as new now!

Erick - Replica

Bw sure to research what LED colors work best. You often need to remove a resistor adjacent to the diode to allow for the colors white/blue/purple.

Evan Wilgosh - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 42

Ultimi 30 Giorni: 170

Tutti i Tempi: 17,468