Aggiusta la tua roba ComunitĂ  Store

Game Boy Advance Screen Replacement

Introduzione

Use this repair guide to replace the screen if it has been damaged.

Cosa ti serve

  1. Game Boy Advance Screen Replacement, Game Boy Advance Teardown: passo 1, immagine 1 di 3 Game Boy Advance Screen Replacement, Game Boy Advance Teardown: passo 1, immagine 2 di 3 Game Boy Advance Screen Replacement, Game Boy Advance Teardown: passo 1, immagine 3 di 3

    • Remove the back battery cover by pinching down on the tab and pulling outward.

    Traduci

  2. Game Boy Advance Screen Replacement: passo 2, immagine 1 di 1

    • Remove the six back panel screws using a Y1 screw driver.

    Traduci

  3. Game Boy Advance Screen Replacement: passo 3, immagine 1 di 1

    • Remove bottom back panel screw with a Phillips #1 screw driver.

    Traduci

  4. Game Boy Advance Screen Replacement: passo 4, immagine 1 di 1

    • Remove the back panel by pulling away with one hand and the front secured in the other hand.

    • Beware of right and left triggers, the right and left panels, and the power switch falling off as the back panel is removed.

    Traduci

  6. Game Boy Advance Screen Replacement: passo 5, immagine 1 di 2 Game Boy Advance Screen Replacement: passo 5, immagine 2 di 2

    • Remove left and right triggers by lifting and pulling them away from the system.

    • Do the same for side panels.

    • For finicky or jammed triggers only. Adjust and correct triggers and reassemble. Most jammed triggers are caused by buttons misplaced or jammed in its enclosure.

    Traduci

  7. Game Boy Advance Screen Replacement: passo 6, immagine 1 di 2 Game Boy Advance Screen Replacement: passo 6, immagine 2 di 2

    • Remove the gray On/Off Switch by pulling up and away from the unit. Replace with another switch if necessary.

    Traduci

  8. Game Boy Advance Screen Replacement: passo 7, immagine 1 di 1

    • Remove the three screws on the circuit board with a Phillips #1 screw driver.

    • The last screw on the right is not included on some Game Boy Advance systems.

    Traduci

  9. Game Boy Advance Screen Replacement: passo 8, immagine 1 di 2 Game Boy Advance Screen Replacement: passo 8, immagine 2 di 2

    • Pull circuit board away from the front panel by pulling up at the bottom of the circuit board, keeping the top ribbon still connected.

    • Beware not to damage the top ribbon by pulling up gently.

    Traduci

  10. Game Boy Advance Screen Replacement: passo 9, immagine 1 di 3 Game Boy Advance Screen Replacement: passo 9, immagine 2 di 3 Game Boy Advance Screen Replacement: passo 9, immagine 3 di 3

    • Remove the rubber button pads from their pockets.

    • Remove the plastic buttons and the D-pad from beneath the rubber pads with tweezers or by hand.

    Traduci

  11. Game Boy Advance Screen Replacement: passo 10, immagine 1 di 3 Game Boy Advance Screen Replacement: passo 10, immagine 2 di 3 Game Boy Advance Screen Replacement: passo 10, immagine 3 di 3

    • Use a spudger/tweezers/fingernail to unlatch the LCD ribbon port by pulling the grey tabs on the sides upwards (towards the top edge of the PCB).

    • Once the LCD ribbon port has been unlatched, the LCD ribbon should very easily slide out and can be removed with zero force using fingers or tweezers.

    Traduci

  12. Game Boy Advance Screen Replacement: passo 11, immagine 1 di 3 Game Boy Advance Screen Replacement: passo 11, immagine 2 di 3 Game Boy Advance Screen Replacement: passo 11, immagine 3 di 3

    • Use the spudger to lift the screen from the front panel. Place the spudger in the space directly left of the D-pad.

    • The screen and the front panel is connected by a black tape that could rip if not removed carefully.

    • You can use an iOpener or a hair dryer on the other side of the front panel in order to soften the black tape.

    Traduci

  13. Game Boy Advance Screen Replacement: passo 12, immagine 1 di 1

    • Use the tweezers to remove the black tape if needed.

    Traduci
Linea Traguardo

Altre 18 persone hanno completato questa guida.

Autore

con 7 altri collaboratori

Adam

Membro da: 01/20/10

815 Reputazione

5 Guide realizzate

Distintivi: 13

+10 altri distintivi

Team

Cal Poly, Team 16-29, Maness Winter 2010 Membro di Cal Poly, Team 16-29, Maness Winter 2010

CPSU-MANESS-W10S16G29

5 Membri

61 Guide realizzate

6 Commenti

Doesn't say where you can get new screen !!!!??

andrew Davies - Replica

Doesn't say where to get screen from !!!??

andrew Davies - Replica

Do this with the Game Boy Advance SP please!

Santi12008 - Replica

It does not say where you can get a new screen

criscaanca - Replica

DONT DO THIS LIKE THAT!!!. The area of the screen in the space beside the D-pad is the only area where the LCD glass is completely exposed. It’s Literaly the WORST place to apply pressure, 99% chances for the LCD to break. There is a notch on the top right corner and another under the ribbon cable. Making your way from the top right to the left is far more safe.

Flyingmcintosh - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 21

Ultimi 7 Giorni: 127

Ultimi 30 Giorni: 469

Tutti i Tempi: 38,056