Aggiusta la tua roba Comunità Store

Furnace Humidifier Evaporator Pad Replacement

Introduzione

Furnace humidifiers are built in almost every household and their function is to help add moisture to the air to keep homes warm especially during the winter. If your furnace humidifier is not working optimally and producing enough warmth, this guide is helpful as there are times when you won’t be able to use an old evaporator pad optimally. Eventually, all the dust and particles can cause mold to grow on the evaporator pad. So, to find a solution to this, one would need to buy a new evaporator pad and replace the old one.

Cosa ti serve

  1. Furnace Humidifier Evaporator Pad Replacement, Furnace Humidifier Evaporator Pad: passo 1, immagine 1 di 1

    • Turn off the humidifier. (Set the humidistat to 0% humidity)

    Modifica

  2. Furnace Humidifier Evaporator Pad Replacement: passo 2, immagine 1 di 2 Furnace Humidifier Evaporator Pad Replacement: passo 2, immagine 2 di 2

    • Remove the nuts and clips holding the top cover of the cabinet assembly to the bottom cabinet housing.

    Modifica

  3. Furnace Humidifier Evaporator Pad Replacement: passo 3, immagine 1 di 1

    • Remove the side clips or fasteners.

    Modifica

  5. Furnace Humidifier Evaporator Pad Replacement: passo 4, immagine 1 di 1

    • Use an adjustable wrench to loosen the nut which holds the water distributor tube and swing the tube out of its secured place.

    Modifica

  6. Furnace Humidifier Evaporator Pad Replacement: passo 5, immagine 1 di 1

    • Remove the top of the bottom cabinet housing and take out the evaporator pad.

    Modifica

  7. Furnace Humidifier Evaporator Pad Replacement: passo 6, immagine 1 di 2 Furnace Humidifier Evaporator Pad Replacement: passo 6, immagine 2 di 2

    • Place the new evaporator pad inside the clean bottom cabinet.

    • The sides should guide it into the correct position.

    Modifica

  8. Furnace Humidifier Evaporator Pad Replacement: passo 7, immagine 1 di 1

    • Replace the clips, nuts, and bolts removed in steps 2 through 4.

    Modifica

  9. Furnace Humidifier Evaporator Pad Replacement: passo 8, immagine 1 di 1

    • Turn on the humidifier.

    Modifica
Conclusione

Enjoy your warm air! Your repair is complete!

Autore

con 1 altro collaboratore

Zia Ahmed

Membro da: 07/11/21

190 Reputazione

1 Guida realizzata

Distintivi: 2

Team

York University, Team F-30, Woodhouse Fall 2021 Membro di York University, Team F-30, Woodhouse Fall 2021

YORK-WOODHOUSE-F21SFG30

1 Membro

1 Guida realizzata

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 10

Tutti i Tempi: 368