Introduzione

The goal of this guide is to show how to replace RAM in the Fujitsu Lifebook T1010.

Parti

Nessuna parte richiesta.

  1. Remove the two Phillips #0 screws from the cover.
    • Remove the two Phillips #0 screws from the cover.

  2. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  3. Remove the cover.
    • Remove the cover.

  4. Two clips secure the RAM module in place, one on each side. Using your fingers, spread the clips away from the RAM module.

    • Two clips secure the RAM module in place, one on each side. Using your fingers, spread the clips away from the RAM module.


    • When released, the RAM module will pop up at a slight angle.

    • Lift the RAM module to an angle of about 30 degrees and slide it out.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Chitara Smith

Membro da: 24/01/2018

575 Reputazione

3 Guide realizzate

Team

Gateway, Team S1-G3, Johnson Spring 2018 Membro di Gateway, Team S1-G3, Johnson Spring 2018

GCC-JOHNSON-S18S1G3

2 Membri

3 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 5

Tutti i Tempi: 53