Salta al contenuto principale

Fujifilm FinePix XP80 Exterior Case Replacement

Solo Prerequisita
Questa guida è destinata a essere usata solo come prerequisito per altre guide. Da sola è incompleta.

Cosa ti serve

  1. Fujifilm FinePix XP80 Exterior Case Replacement, Exterior Case: passo 1, immagine 1 di 1
    • Using a Phillips PH000 bit, remove the five 2mm screws on the bottom of the camera.

  2. Fujifilm FinePix XP80 Exterior Case Replacement: passo 2, immagine 1 di 1
    • Using a H1.3 hex head bit, remove the two 2mm screws from the top of the camera.

  3. Fujifilm FinePix XP80 Exterior Case Replacement: passo 3, immagine 1 di 1
    • Using a H1.3 hex head bit, remove the two 2mm screws on the side of the camera.

  4. Fujifilm FinePix XP80 Exterior Case Replacement: passo 4, immagine 1 di 1
    • Using a plastic opening tool, gently pry up the edge of the button case, located at the top of the camera, until it unclips.

  5. Fujifilm FinePix XP80 Exterior Case Replacement: passo 5, immagine 1 di 1
    • Gently pry the side area of the case apart.

  6. Fujifilm FinePix XP80 Exterior Case Replacement: passo 6, immagine 1 di 1
    • Continue using the opening tool on the bottom of the camera to gently pry the case apart.

  7. Fujifilm FinePix XP80 Exterior Case Replacement: passo 7, immagine 1 di 2 Fujifilm FinePix XP80 Exterior Case Replacement: passo 7, immagine 2 di 2
    • Use the plastic opening tool to carefully pry the yellow front panel completely away from the camera.

    • Use your hands to take off the yellow back panel.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Team

USF Tampa, Team 1-3, Cagle Fall 2016 Membro di USF Tampa, Team 1-3, Cagle Fall 2016

USFT-CAGLE-F16S1G3

5 Membri

14 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 4

Tutti i Tempi: 66