Salta al contenuto principale

Fujifilm Endeavor 100ix Camera Battery Replacement

Cosa ti serve

  1. Fujifilm Endeavor 100ix Camera Battery Replacement, Battery: passo 1, immagine 1 di 1
    • Locate the battery door marked “BATT” on the bottom of the camera.

  2. Fujifilm Endeavor 100ix Camera Battery Replacement: passo 2, immagine 1 di 1
    • Pull the battery door tab upward and press in the direction indicated by the arrow on the tab.

  3. Fujifilm Endeavor 100ix Camera Battery Replacement: passo 3, immagine 1 di 1
    • Remove the battery by pulling the battery door outward.

  4. Fujifilm Endeavor 100ix Camera Battery Replacement: passo 4, immagine 1 di 1
    • Ensure that the clear plastic strip is below the new battery.

    • Place the new 3 Volt CR2 Lithium Battery in the battery compartment.

Conclusione

After inserting new battery, close the battery door to finish repair.

Altre 2 persone hanno completato questa guida.

Eric Nicolai

Membro da: 01/10/11

679 Reputazione

6 Guide realizzate

Team

Cal Poly, Team 13-5, Forte Winter 2011 Membro di Cal Poly, Team 13-5, Forte Winter 2011

CPSU-FORTE-W11S13G5

5 Membri

11 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 1,855