Introduzione

Use this guide to replace the battery door.

Parti

Nessuna parte richiesta.

Locate and remove two 6.4mm screws on the bottom of the camera with a Phillips #00 screwdriver.
  • Locate and remove two 6.4mm screws on the bottom of the camera with a Phillips #00 screwdriver.

Aggiungi Commento

Locate the battery door.
  • Locate the battery door.

Aggiungi Commento

  • Locate the latch on the battery door.

  • Use your finger pry to it open where it says "BATT."

Aggiungi Commento

  • Remove the battery from the camera by pulling the battery door outward.

Aggiungi Commento

  • Locate and remove three black 3.80mm screws on the back of the black casing with the Phillips #00 screwdriver.

Aggiungi Commento

  • Squeeze the camera placing a thumb on the tab marked CE.

  • Pull the back half of the camera firmly away from the camera body.

Aggiungi Commento

  • Locate and remove the 3.80mm screw that holds the plastic strip to the camera body with a Phillips #00 screwdriver.

  • The plastic strip will now come off the camera body.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Eric Nicolai

Membro da: 10/01/2011

679 Reputazione

6 Guide realizzate

Team

Cal Poly, Team 13-5, Forte Winter 2011 Membro di Cal Poly, Team 13-5, Forte Winter 2011

CPSU-FORTE-W11S13G5

5 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,642