Salta al contenuto principale

FujiFilm FinePix XP10SE Front Cover Replacement

Cosa ti serve

  1. FujiFilm FinePix XP10SE Front Cover Replacement, Front Cover: passo 1, immagine 1 di 3 FujiFilm FinePix XP10SE Front Cover Replacement, Front Cover: passo 1, immagine 2 di 3 FujiFilm FinePix XP10SE Front Cover Replacement, Front Cover: passo 1, immagine 3 di 3
    • Use a screwdriver to remove the four screws from the top and bottom of the camera. Remove the screws securing the lanyard as well.

    • Use a T5 Torx bit to secure the exterior decorative cover of the device.

  2. FujiFilm FinePix XP10SE Front Cover Replacement: passo 2, immagine 1 di 2 FujiFilm FinePix XP10SE Front Cover Replacement: passo 2, immagine 2 di 2
    • Use a plastic opening tool to detach the case.

  3. FujiFilm FinePix XP10SE Front Cover Replacement: passo 3, immagine 1 di 2 FujiFilm FinePix XP10SE Front Cover Replacement: passo 3, immagine 2 di 2
    • Use the plastic opening tool to cautiously pry the casing off of the camera.

  4. FujiFilm FinePix XP10SE Front Cover Replacement: passo 4, immagine 1 di 3 FujiFilm FinePix XP10SE Front Cover Replacement: passo 4, immagine 2 di 3 FujiFilm FinePix XP10SE Front Cover Replacement: passo 4, immagine 3 di 3
    • Carefully slide the case to the left. Avoid cracking the case on the lens.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Bryan

Membro da: 01/25/15

598 Reputazione

5 Guide realizzate

Team

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 147