Introduzione
The springs in your flash mechanism may break or become worn out. If this happens, follow these steps to replace them.
Cosa ti serve
-
-
Remove the two 3.5 mm Phillips #1 screws in these positions on the left side of the camera with a screwdriver.
-
-
-
-
Remove the 3.5 mm Phillips #1 screws holding the top to allow access to the flash mechanism.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.