Introduzione

Is your LCD damaged? It is time to replace it! This guide will show you all the steps required to replace your camera Screen Display. It is simple and a good DIY project. Save your money and fix your camera yourself.

Parti

Nessuna parte richiesta.

  1. Remove Batteries Remove exterior Screws Remove exterior Screws
    • Remove Batteries

    • Remove exterior Screws

  2. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  3. Rear Housing Case Remove screw Release flex cable from Main Board
    • Rear Housing Case

    • Remove screw

    • Release flex cable from Main Board

    • Release the clamps from the notches to free the top rear plate

  4. Release the LCD flex cable from the ziff socket.  Careful not to damage ziff clamp Next swap out your old LCD with your new LCD and reverse the steps.
    • Release the LCD flex cable from the ziff socket. Careful not to damage ziff clamp

    • Next swap out your old LCD with your new LCD and reverse the steps.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 20