Aggiusta la tua roba Comunità Store

Fugoo Style XL Speaker Replacement

Introduzione

The Fugoo Style XL has small core speakers resting within the casing that are remarkably easy to remove.

Cosa ti serve

  1. Fugoo Style XL Speaker Replacement, Fabric Case: passo 1, immagine 1 di 2 Fugoo Style XL Speaker Replacement, Fabric Case: passo 1, immagine 2 di 2

    • Using your hand, unscrew the large screws underneath the speaker.

    Traduci

  2. Fugoo Style XL Speaker Replacement: passo 2, immagine 1 di 3 Fugoo Style XL Speaker Replacement: passo 2, immagine 2 di 3 Fugoo Style XL Speaker Replacement: passo 2, immagine 3 di 3

    • Using your hand, gently lift the large plastic tab secured to the rubber holding.

    • After lifting the tab, slide the speaker out of its case.

    • Ensure the tab is lifted only slightly above the rubber holding. Bending the plastic tab too far could result in damage to the case.

    Traduci

  3. Fugoo Style XL Speaker Replacement, Speaker: passo 3, immagine 1 di 2 Fugoo Style XL Speaker Replacement, Speaker: passo 3, immagine 2 di 2

    • There are 8 screws (4 on each side) holding covers that conceal the bass speakers. Remove these 3mm screws using a #2.0 Hex screwdriver.

    Traduci

  5. Fugoo Style XL Speaker Replacement: passo 4, immagine 1 di 2 Fugoo Style XL Speaker Replacement: passo 4, immagine 2 di 2

    • Using your hand, pull the covers away from the speaker.

    Traduci

  6. Fugoo Style XL Speaker Replacement: passo 5, immagine 1 di 2 Fugoo Style XL Speaker Replacement: passo 5, immagine 2 di 2

    • Using a #2.0 Hex screwdriver to unscrew the 8 12mm screws depicted.

    Traduci

  7. Fugoo Style XL Speaker Replacement: passo 6, immagine 1 di 2 Fugoo Style XL Speaker Replacement: passo 6, immagine 2 di 2

    • Gently pull apart the front casing from the back casing.

    • Speakers on the front casing have wires directly connected to the motherboard. Pulling off the casing with force will result in damage.

    Traduci

  8. Fugoo Style XL Speaker Replacement: passo 7, immagine 1 di 2 Fugoo Style XL Speaker Replacement: passo 7, immagine 2 di 2

    • Using a pair of tweezers or your hand, carefully remove the red bundled cable connectors from the motherboard.

    Traduci

  9. Fugoo Style XL Speaker Replacement: passo 8, immagine 1 di 3 Fugoo Style XL Speaker Replacement: passo 8, immagine 2 di 3 Fugoo Style XL Speaker Replacement: passo 8, immagine 3 di 3

    • Each speaker is attached to the casing with 3mm screws. Remove the screws using a #2.0 Hex screwdriver.

    • Once the screws are removed, carefully lift the speaker from the casing.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 1 altro collaboratore

James Gifford

Membro da: 09/25/17

573 Reputazione

5 Guide realizzate

Distintivi: 9

+6 altri distintivi

Team

USF Tampa, Team S3-G4, Cannon Fall 2017 Membro di USF Tampa, Team S3-G4, Cannon Fall 2017

USFT-CANNON-F17S3G4

4 Membri

5 Guide realizzate

Un commento

Hello James,

Nice work. But where can I find the replacement speaker?! Best Regards

Andre Costa - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 8

Tutti i Tempi: 760