Aggiusta la tua roba Comunità Store

Fugoo Style XL Midwoofer Replacement

Introduzione

The Fugoo Style XL has two midwoofers connected to the casing that can be removed and replaced.

Cosa ti serve

  1. Fugoo Style XL Midwoofer Replacement, Fabric Case: passo 1, immagine 1 di 2 Fugoo Style XL Midwoofer Replacement, Fabric Case: passo 1, immagine 2 di 2

    • Using your hand, unscrew the large screws underneath the speaker.

    Traduci

  2. Fugoo Style XL Midwoofer Replacement: passo 2, immagine 1 di 3 Fugoo Style XL Midwoofer Replacement: passo 2, immagine 2 di 3 Fugoo Style XL Midwoofer Replacement: passo 2, immagine 3 di 3

    • Using your hand, gently lift the large plastic tab secured to the rubber holding.

    • After lifting the tab, slide the speaker out of its case.

    • Ensure the tab is lifted only slightly above the rubber holding. Bending the plastic tab too far could result in damage to the case.

    Traduci

  3. Fugoo Style XL Midwoofer Replacement, Midwoofer: passo 3, immagine 1 di 2 Fugoo Style XL Midwoofer Replacement, Midwoofer: passo 3, immagine 2 di 2

    • There are 8 screws (4 on each side) holding covers that conceal the bass speakers. Remove these 3mm screws using a #2.0 Hex screwdriver.

    Traduci

  5. Fugoo Style XL Midwoofer Replacement: passo 4, immagine 1 di 2 Fugoo Style XL Midwoofer Replacement: passo 4, immagine 2 di 2

    • Using your hand, pull the covers away from the speaker.

    Traduci

  6. Fugoo Style XL Midwoofer Replacement: passo 5, immagine 1 di 2 Fugoo Style XL Midwoofer Replacement: passo 5, immagine 2 di 2

    • Using a #2.0 Hex screwdriver to unscrew the 8 12mm screws depicted.

    Traduci

  7. Fugoo Style XL Midwoofer Replacement: passo 6, immagine 1 di 2 Fugoo Style XL Midwoofer Replacement: passo 6, immagine 2 di 2

    • Gently pull apart the front casing from the back casing.

    • Speakers on the front casing have wires directly connected to the motherboard. Pulling off the casing with force will result in damage.

    Traduci

  8. Fugoo Style XL Midwoofer Replacement: passo 7, immagine 1 di 2 Fugoo Style XL Midwoofer Replacement: passo 7, immagine 2 di 2

    • Using a pair of tweezers or your hand, carefully remove the red bundled cable connectors from the motherboard.

    • When the red bundled cable connectors are disconnected, set the outer casing aside.

    Traduci

  9. Fugoo Style XL Midwoofer Replacement: passo 8, immagine 1 di 2 Fugoo Style XL Midwoofer Replacement: passo 8, immagine 2 di 2

    • Carefully untangle and remove the white bundled cable connectors from the motherboard.

    Traduci

  10. Fugoo Style XL Midwoofer Replacement: passo 9, immagine 1 di 2 Fugoo Style XL Midwoofer Replacement: passo 9, immagine 2 di 2

    • Using a T9 screwdriver, remove the 8 screws (4 on each speaker) surrounding the midwoofers.

    • Using your hand, carefully remove the midwoofers.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 1 altro collaboratore

James Gifford

Membro da: 09/25/17

573 Reputazione

5 Guide realizzate

Distintivi: 9

+6 altri distintivi

Team

USF Tampa, Team S3-G4, Cannon Fall 2017 Membro di USF Tampa, Team S3-G4, Cannon Fall 2017

USFT-CANNON-F17S3G4

4 Membri

5 Guide realizzate

Un commento

can anyone tell me where I can buy the replacement speaker

Michael Johnsson - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 398