Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
We will start by removing the wheel and removing any debris that may be obstructing motion, and then reattach the wheel to the axle of the chair.
Familiarize yourself with the tools required for this guide by reading through the Free Wheelchair Mission Tools Maintenance Guide.
Cosa ti serve
-
-
Use the socket head of the 19mm wrench to unscrew the nut that connects the castor wheel’s fork to the steel frame
-
Remove the wheel from the small steel frame
-
-
-
Hold the bolt that connects the wheel to the fork with pliers
-
Use the socket head of the 10 mm wrench in your other hand to remove the nut on the other end of the bolt
-
-
-
-
Flip wheel over and remove the bolt
-
Remove the castor wheel
-
-
-
Check for and remove any debris from the wheel or wheel axle that may be obstructing motion of the wheel
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.
Team
Cal Poly, Team 14-7, Maness Spring 2013 Membro di Cal Poly, Team 14-7, Maness Spring 2013
CPSU-MANESS-S13S14G7
5 Membri
7 Guide realizzate
