Salta al contenuto principale

Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.

Cosa ti serve

  1. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 1, immagine 1 di 3 : passo 1, immagine 2 di 3 : passo 1, immagine 3 di 3
    • Keep clasp in open position.

    • Push one of the spring-loaded pins out of the hole with a Push-pin.

    • Wiggle watch band and clasp till free from each other.

  2. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 2, immagine 1 di 1
    • Fit the blades of a pair of scissors into the grooves of the screw back.

    • Twist the screw back counter clockwise with the scissors.

    • Once the back is loose enough, you can use your fingers to twist it off.

Linea Traguardo

Altre 2 persone hanno completato questa guida.

Team

Cal Poly, Team 14-10, Amido Spring 2015 Membro di Cal Poly, Team 14-10, Amido Spring 2015

CPSU-AMIDO-S15S14G10

3 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 15

Tutti i Tempi: 1,030