Salta al contenuto principale

Introduzione

This guide shows the general disassembly of the watch. This guide serves as a prerequisite for all guides on internal component replacement . When following this guide be extra careful when undoing wire connections because they can be fragile.

Parti

Nessuna parte specificata.

  1. Squeeze retaining pins together to release chain from watch body. This can be done by hand or with tweezers.
    • Squeeze retaining pins together to release chain from watch body. This can be done by hand or with tweezers.

    • Remove chain from opposing side of watch body.

  2. Use tweezers to grip the notches on the back cover, then unscrew the back cover (counter-clockwise) from the watch housing.
    • Use tweezers to grip the notches on the back cover, then unscrew the back cover (counter-clockwise) from the watch housing.

    • There is an actual tool made to remove this back cover, using the right tool may save you from scratching the back of watch with tweezers. The backcover tool can be purchased online, a local jeweler may also be willing to remove it for you.

  3. Utilize tweezers or a spudger or your fingers to pull the black wire connector from the motherboard. Utilize a spudger to pull the orange connector off of the motherboard.
    • Utilize tweezers or a spudger or your fingers to pull the black wire connector from the motherboard.

    • Utilize a spudger to pull the orange connector off of the motherboard.

  4. Utilize tweezers to pull the white battery connector from the motherboard.
    • Utilize tweezers to pull the white battery connector from the motherboard.

  5. The internal electronics can now be pulled out of the watch as one unit leaving the screen remaining in the watch housing. Taking the flat end of the spudger, pry it up. Taking the flat end of the spudger, pry it up.
    • The internal electronics can now be pulled out of the watch as one unit leaving the screen remaining in the watch housing.

    • Taking the flat end of the spudger, pry it up.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Matthew Tucker

Membro da: 07/11/2017

397 Reputazione

3 Guide realizzate

Team

IUPUI, Team S2-G5, Harley Fall 2017 Membro di IUPUI, Team S2-G5, Harley Fall 2017

IUPUI-HARLEY-F17S2G5

3 Membri

4 Guide realizzate

How do you remove the power switch?

Rahim Parpia - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 6

Ultimi 7 Giorni: 53

Ultimi 30 Giorni: 237

Tutti i Tempi: 3,280