Aggiusta la tua roba Comunità Store

Flip Video Ultra Circuit Board Replacement

Introduzione

This guide will walk you through how to remove and replace the circuit board should your device be broken or malfunctioning. You will need a # 1 Phillips Head screwdriver, a plastic opening tool and tweezers. This easy process should take no more than 15 minutes.

Cosa ti serve

  1. Flip Video Ultra Circuit Board Replacement, Circuit Board: passo 1, immagine 1 di 1

    • Unlock the battery cover by sliding the switch to the unlock position.

    Modifica

  2. Flip Video Ultra Circuit Board Replacement: passo 2, immagine 1 di 1

    • Remove the battery cover by sliding it down the camera.

    Modifica

  3. Flip Video Ultra Circuit Board Replacement: passo 3, immagine 1 di 1

    • Remove the batteries

    Modifica

  4. Flip Video Ultra Circuit Board Replacement: passo 4, immagine 1 di 1

    • Slide the black upper casing off from the device.

    Modifica

  5. Flip Video Ultra Circuit Board Replacement: passo 5, immagine 1 di 2 Flip Video Ultra Circuit Board Replacement: passo 5, immagine 2 di 2

    • Remove the six 1mm screws from the back and upper casing with the Phillips Head screwdriver.

    Modifica

  6. Flip Video Ultra Circuit Board Replacement: passo 6, immagine 1 di 1

    • Remove the top casing from the bottom to reveal the inner circuit board.

    Modifica

  8. Flip Video Ultra Circuit Board Replacement: passo 7, immagine 1 di 2 Flip Video Ultra Circuit Board Replacement: passo 7, immagine 2 di 2

    • When removing the back panel, the rubber buttons will become loose and likely fall off the board. This is normal and can easily placed back on the board once finished.

    • Remove the six 1mm screws with the 1 Phillips head screwdriver.

    Modifica

  9. Flip Video Ultra Circuit Board Replacement: passo 8, immagine 1 di 1

    • Gently separate the circuit board from the casing.

    Modifica

  10. Flip Video Ultra Circuit Board Replacement: passo 9, immagine 1 di 2 Flip Video Ultra Circuit Board Replacement: passo 9, immagine 2 di 2

    • Unscrew the single 1mm screw from USB housing unit.

    Modifica

  11. Flip Video Ultra Circuit Board Replacement: passo 10, immagine 1 di 2 Flip Video Ultra Circuit Board Replacement: passo 10, immagine 2 di 2

    • Unscrew the 2 1mm screws and gently separate camera wires from plastic casing.

    Modifica

  12. Flip Video Ultra Circuit Board Replacement: passo 11, immagine 1 di 1

    • Gently pry out the USB housing unit with the Ifxit Opening Tool.

    Modifica

  13. Flip Video Ultra Circuit Board Replacement: passo 12, immagine 1 di 3 Flip Video Ultra Circuit Board Replacement: passo 12, immagine 2 di 3 Flip Video Ultra Circuit Board Replacement: passo 12, immagine 3 di 3

    • Remove the two 1mm screws and separate the circuit board and camera from the plastic casing.

    Modifica

  14. Flip Video Ultra Circuit Board Replacement: passo 13, immagine 1 di 1

    • Unscrew the camera housing unit from the plastic case.

    Modifica

  15. Flip Video Ultra Circuit Board Replacement: passo 14, immagine 1 di 3 Flip Video Ultra Circuit Board Replacement: passo 14, immagine 2 di 3 Flip Video Ultra Circuit Board Replacement: passo 14, immagine 3 di 3
    Attrezzo utilizzato in questo passaggio:
    Tweezers
    $4.99
    Compra

    • With tweezers, remove the microphone and USB connections.

    Modifica

  16. Flip Video Ultra Circuit Board Replacement: passo 15, immagine 1 di 2 Flip Video Ultra Circuit Board Replacement: passo 15, immagine 2 di 2

    • Unscrew the two 1mm screws from the board shown. Remove screen from circuit board.

    Modifica

  17. Flip Video Ultra Circuit Board Replacement: passo 16, immagine 1 di 2 Flip Video Ultra Circuit Board Replacement: passo 16, immagine 2 di 2

    • Remove the single 2.1 mm screw and separate camera from the circuit board.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 4 altri collaboratori

Nathaniel Ruf

Membro da: 10/18/16

514 Reputazione

5 Guide realizzate

Distintivi: 5

+2 altri distintivi

Team

UMass Dartmouth, Team 5-7, Martin Fall 2016 Membro di UMass Dartmouth, Team 5-7, Martin Fall 2016

UMASSD-MARTIN-F16S5G7

3 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 13

Tutti i Tempi: 689