Aggiusta la tua roba Comunità Store

Fixing a Rusted Measuring Tape

Introduzione

Use this guide to fix any rusted measuring tape.

Over time measuring tapes tend to rust. It prevents accurate measurements, which can impact your project. This guide illustrates 7 steps to make any rusted measuring tape work accurately again.

Cosa ti serve

  1. Fixing a Rusted Measuring Tape, Measuring Tape: passo 1, immagine 1 di 1

    • Untighten the 9.5 mm Phillips screw with the Phillips screwdriver.

    • Remove the belt clip.

    Modifica

  2. Fixing a Rusted Measuring Tape: passo 2, immagine 1 di 1

    • Pull the case length off.

    Modifica

  4. Fixing a Rusted Measuring Tape: passo 3, immagine 1 di 1

    • Untighten the 15.7 mm Phillips screw with the Phillips screwdriver.

    Modifica

  5. Fixing a Rusted Measuring Tape: passo 4, immagine 1 di 1

    • Open the case with hands.

    Modifica

  6. Fixing a Rusted Measuring Tape: passo 5, immagine 1 di 1

    • Spray lubricant solution (WD-40) into the spring as indicated.

    Modifica

  7. Fixing a Rusted Measuring Tape: passo 6, immagine 1 di 1

    • Pull tape in and out to ensure all the lubricant is applied to the spring.

    • Apply lubricant in increments (be gentle and apply slowly).

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 3 altri collaboratori

Miles Kim

Membro da: 04/25/24

133 Reputazione

1 Guida realizzata

Distintivi: 2

Team

UC Davis, Team 3-4, Whithaus Spring 2024 Membro di UC Davis, Team 3-4, Whithaus Spring 2024

UCD-WHITHAUS-S24S3G4

3 Membri

1 Guida realizzata

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 7

Ultimi 30 Giorni: 33

Tutti i Tempi: 49