Aggiusta la tua roba Comunità Store

Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler

Introduzione

This guide will teach you how to fix a jammed paper-roll in your Brother PT-90 Label-Maker.

Cosa ti serve

  1. Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler, Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 1, immagine 1 di 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler, Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 1, immagine 2 di 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler, Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 1, immagine 3 di 3

    • Turn your label-maker on its face. Using your thumb, press in and then upward on the fastener located on the side of your device.

    Modifica

  2. Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 2, immagine 1 di 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 2, immagine 2 di 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 2, immagine 3 di 3

    • Remove the batteries from your device.

    Modifica

  4. Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 3, immagine 1 di 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 3, immagine 2 di 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 3, immagine 3 di 3

    • Using a plastic opening tool from your iFixit tool kit, leverage the label cartridge out of your device.

    Modifica

  5. Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 4, immagine 1 di 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 4, immagine 2 di 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 4, immagine 3 di 3

    • Press the label paper back into alignment with the small holders on the right side of the label cartridge.

    Modifica

  6. Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 5, immagine 1 di 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 5, immagine 2 di 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 5, immagine 3 di 3

    • Place the label cartridge and batteries back into your device. Refasten the bottom case of the label-maker.

    Modifica

  7. Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 6, immagine 1 di 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 6, immagine 2 di 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 6, immagine 3 di 3

    • Well done! You have successfully corrected the paper-jam in your Brother PT-90 Label-Maker.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 4 altri collaboratori

Kaitlyn Abrams

Membro da: 10/13/16

1 Reputazione

1 Guida realizzata

Distintivi: 2

Team

University of Maine, Team 2-1, Diaz Fall 2016 Membro di University of Maine, Team 2-1, Diaz Fall 2016

UMAINE-DIAZ-F16S2G1

3 Membri

2 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 784