Cosa ti serve
Panoramica Video
-
-
Warm up the device to soften the adhesive.
-
To separate the back cover, use plastic tools, a playing card, isopropyl alcohol and a suction cup.
-
-
-
You can now remove the screws holding the plastic motherboard cover.
-
Pry the cover free.
-
-
-
-
Disconnect the battery.
-
Disconnect all cameras flex cables (x4) and remove them.
-
Now test the device without the camera.
-
-
-
If the phone starts normally, check and clean main camera connectors.
-
Check all conductive adhesive tapes and recover them.
-
Now you are ready to assemble the device.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 6 persone hanno completato questa guida.
Team
