Fast Fix Steel Blade On CCM Skates Replacement

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Introduzione

All ice skates need to be sharpened in order for the user to properly skate on ice. Over time, sharpening wears down the steel that makes up the blade to the point of needing to be replaced. Blades on an ice skate can also break which causes them to need replacing. This guide will show you how to replace the steel blade on CCM ice skates.

Cosa ti serve

Passo 1 Steel Blade On CCM Skates

Fast Fix Steel Blade On CCM Skates Replacement, Steel Blade On CCM Skates: passo 1, immagine 1 di 1

Place the palm of one hand over the laces at the middle of the skate boot.
Close that palm and firmly grasp the skate.
Use the other hand to grab and remove any skate guard.

Traduci

Passo 2

Place the heel/back portion of the skate on the table.
Firmly grasp the toe of the skate with one hand.
Insert the flat head screwdriver from a multi-tool into the groove of the first screw and hold.

Traduci

Passo 3

Using multi-tool pliers, grab hold of the fastener on the other side of the first screw.
Turn the flat head screwdriver in a counter clockwise rotation until it is loose.

Traduci

Passo 4

Remove the loosened screw from the white plastic blade holder.
Insert the screwdriver into the fastener and apply pressure to remove the fastener.

Traduci

Passo 5

Place the heel/back portion of the skate on the table.
Firmly grasp the toe of the skate with one hand.
Insert the flat head screwdriver from a multi-tool into the groove of the second screw and hold.

Traduci

Passo 6

Using multi-tool pliers, grab hold of the fastener on the other side of the second screw.
Turn the flat head screwdriver in a counter clockwise rotation until it is loose.

Traduci