Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
Some vital parts of the vacuum cleaner require you to remove the casing in order to replace them. This guide serves as a prerequisite only to the guides on how to replace those parts.
Cosa ti serve
-
-
Unscrew the two 18.1 mm PH2 Phillips head screws on the bottom of the vacuum.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.