Salta al contenuto principale

Introduzione

This guide serves as a prerequisite only. The steps covered in this guide are used in all the replacement guides.

  1. Unscrew the two 18.1 mm PH2 Phillips head screws on the bottom of the vacuum.
    • Unscrew the two 18.1 mm PH2 Phillips head screws on the bottom of the vacuum.

  2. Pry off the Riser Visor using the plastic opening tool.
    • Pry off the Riser Visor using the plastic opening tool.

  3. Remove the screw cap using the metal spudger.
    • Remove the screw cap using the metal spudger.

    • First-time removal of the screw cap can be difficult. The screw cap isn’t vital, so don’t worry about damaging the screw cap and just keep trying until it comes out.

  4. Unscrew the 14mm PH2 Phillips head screw. Pull the bottom cover off of the rest of the casing.
    • Unscrew the 14mm PH2 Phillips head screw.

    • Pull the bottom cover off of the rest of the casing.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Tanner Durnil

Membro da: 06/11/2017

631 Reputazione

6 Guide realizzate

Team

IUPUI, Team S6-G4, Baechle Fall 2017 Membro di IUPUI, Team S6-G4, Baechle Fall 2017

IUPUI-BAECHLE-F17S6G4

3 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 123