Salta al contenuto principale

Introduzione

If you determine that your vacuum is no longer picking up debris or it has been six months since the last HEPA filter replacement, this guide will help you to replace the filter to increase the suction.

  1. Press the grey dust cup release button and gently pull the dust cup towards you. Press the grey dust cup release button and gently pull the dust cup towards you.
    • Press the grey dust cup release button and gently pull the dust cup towards you.

  2. Twist the exposed, black HEPA filter cover, found underneath the removed dust cup, to the left (counterclockwise) until it releases. Twist the exposed, black HEPA filter cover, found underneath the removed dust cup, to the left (counterclockwise) until it releases. Twist the exposed, black HEPA filter cover, found underneath the removed dust cup, to the left (counterclockwise) until it releases.
    • Twist the exposed, black HEPA filter cover, found underneath the removed dust cup, to the left (counterclockwise) until it releases.

  3. Pull the grey handle on the HEPA filter to remove the used HEPA filter.
    • Pull the grey handle on the HEPA filter to remove the used HEPA filter.

  4. Place new HEPA filter into holder.
    • Place new HEPA filter into holder.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Celina Burchett

Membro da: 13/10/2014

1.122 Reputazione

8 Guide realizzate

Team

Clemson, Team 2-2, Benson Fall 2014 Membro di Clemson, Team 2-2, Benson Fall 2014

CLEM-BENSON-F14S2G2

4 Membri

8 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 4

Tutti i Tempi: 1,610