Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
If the accessory holder is no longer able to hold the multiple tools associated with the vacuum, this guide outlines the its replacement.
Cosa ti serve
-
-
On the back of the vacuum, pull the handle connected to the hose away from the vacuum.
-
-
-
-
Using a T15 Torx Security Screwdriver, remove the screw on each side of the indention in which the hose normally rests.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.