Aggiusta la tua roba Comunità Store

Eufy RoboVac 11S Bumper Replacement

Introduzione

The front bumper of the RoboVac 11s is used to sense obstacles in its path. A malfunctioning front bumper can cause the Robovac to move in a circular motion. Use this guide to remove or replace the front bumper on your RoboVac 11s.

Cosa ti serve

  1. Eufy RoboVac 11S Bumper Replacement, Bumper: passo 1, immagine 1 di 1

    • Turn off the RoboVac's power and flip it over onto a soft surface.

    Traduci

  2. Eufy RoboVac 11S Bumper Replacement: passo 2, immagine 1 di 2 Eufy RoboVac 11S Bumper Replacement: passo 2, immagine 2 di 2

    • Using the Phillips screwdriver, remove the eight 5 mm Phillips screws from the top of the bumper.

    • 4 screws on each long edge.

    Traduci

  4. Eufy RoboVac 11S Bumper Replacement: passo 3, immagine 1 di 1

    • Lift the bumper slightly and locate the cable connecting it to the main body. Unplug this cable.

    Traduci

  5. Eufy RoboVac 11S Bumper Replacement: passo 4, immagine 1 di 1

    • Wiggle the bumper gently to detach it completely.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 7

Ultimi 30 Giorni: 36

Tutti i Tempi: 188