Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Epiphone ES-335 PRO Pickguard Replacement

Cosa ti serve

  1. Epiphone ES-335 PRO Pickguard Replacement, Pickguard: passo 1, immagine 1 di 1
    • Locate the screw closest to the neck of the guitar.

    • Use a phillips head #2 screwdriver to completely unscrew the 1.0 mm length screw.

    • Be sure to keep any screws together as you will use them again, unless the replacement pickguard has its own screws.

  2. Epiphone ES-335 PRO Pickguard Replacement: passo 2, immagine 1 di 2 Epiphone ES-335 PRO Pickguard Replacement: passo 2, immagine 2 di 2
    • Using a phillips head #2 screwdriver, completely unscrew the 1.0 mm length screw.

    • Gently lift the pickguard off the body of the guitar.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un commento

very nice and simple demo, but where would you get a new pickguard, as Epiphone will not

supply them and other aftermarket guards will not fit.

peterattard1 - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 9

Ultimi 30 Giorni: 90

Tutti i Tempi: 4,451