Ematic Model FTABMP2 Battery Replacement

Introduzione

This guide will show you how to replace the battery in the Ematic Model FTABMP2, a tablet targeted towards children. The battery may need to be replaced if the device isn't turning on. To replace the battery, you will need a iFixIt opening tool as well as a Soldering Iron 60w Hakko 503F.

Cosa ti serve

Passo 1 Battery

Ematic Model FTABMP2 Battery Replacement, Battery: passo 1, immagine 1 di 2

Ematic Model FTABMP2 Battery Replacement, Battery: passo 1, immagine 2 di 2

Use a spudger to pry open the case. Do this on the long side of the case. This will reveal the inside.

Traduci

Passo 2

Disconnect the LCD cable from the motherboard by pressing together the two sides of the clamp to separate the device into two.

Traduci

Passo 3

First, Remove the screws holding down the motherboard. Then remove the plastic power and volume buttons.
Next, remove the two side grips of the device. Now, you can remove the motherboard, speaker, and battery as one from the device.

Traduci