Aggiusta la tua roba Comunità Store

Ematic Genesis 2 Screen Replacement

Introduzione

This repair guide will teach you how to replace the battery in the Ematic Genesis 2 tablet.

Cosa ti serve

  1. Ematic Genesis 2 Screen Replacement, Screen: passo 1, immagine 1 di 2 Ematic Genesis 2 Screen Replacement, Screen: passo 1, immagine 2 di 2

    • With your fingers, carefully pry off the back plastic casing. Starting at the corners is usually the easiest.

    Modifica

  2. Ematic Genesis 2 Screen Replacement: passo 2, immagine 1 di 3 Ematic Genesis 2 Screen Replacement: passo 2, immagine 2 di 3 Ematic Genesis 2 Screen Replacement: passo 2, immagine 3 di 3

    • Remove all four screws surrounding the battery with a Phillips Head Screwdriver.

    • Carefully remove the battery from the device using the Metal Spudger tool to gently separate the battery by wedging it between the device and the battery.

    Modifica

  4. Ematic Genesis 2 Screen Replacement: passo 3, immagine 1 di 2 Ematic Genesis 2 Screen Replacement: passo 3, immagine 2 di 2

    • Remove the three screws surrounding the circuit board using the Phillips Head Screwdriver.

    • Remove the circuit board from the device by uncliping the copper flexible PCB ribbon cable from the circuit board.

    Modifica

  5. Ematic Genesis 2 Screen Replacement: passo 4, immagine 1 di 1

    • Use the Small Pointed Metal Spudger to separate the LED screen from the front screen by gently wedging the spudger between the screen and the device.

    Modifica

  6. Ematic Genesis 2 Screen Replacement: passo 5, immagine 1 di 1

    • Remove the glass from the front casing by using the metal spudger to break it free from the device. (It's held together by glue.)

    • Install the new screen.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 3

Tutti i Tempi: 439