Aggiusta la tua roba Comunità Store

Electric Bike Throttle Replacement

Introduzione

Use this guide to replace your Electric Bike Throttle.

Cosa ti serve

  1. Electric Bike Throttle Replacement, Brake: passo 1, immagine 1 di 1

    • Before starting to disassemble your electric bike, turn the power off.

    • Remove the 3/32 inch Allen screw.

    • When removing Allen screw, make sure the driver is well seated because they are simple to strip.

    Modifica

  2. Electric Bike Throttle Replacement, Throttle: passo 2, immagine 1 di 1

    • Locate the throttle Allen screw.

    • Remove the 5/64 inch Allen screw.

    Modifica

  3. Electric Bike Throttle Replacement, Throttle: passo 3, immagine 1 di 1

    • Slide the Throttle off.

    • When removing the throttle, be careful. Remove it slowly to avoid damaging the wire.

    Modifica

  5. Electric Bike Throttle Replacement, Control Box: passo 4, immagine 1 di 1

    • Remove the following screws.

    • 2 mm Philips screws.

    Modifica

  6. Electric Bike Throttle Replacement: passo 5, immagine 1 di 1

    • Open up the control box.

    Modifica

  7. Electric Bike Throttle Replacement: passo 6, immagine 1 di 1

    • Track the throttle wire.

    • To ensure you don't lose it, you should mark it.

    Modifica

  8. Electric Bike Throttle Replacement: passo 7, immagine 1 di 1

    • Locate the throttle wire.

    • Disconnect the throttle wire plug from the controller wire plug.

    • Take caution while handling these wires. You can easily damage them.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 2 altri collaboratori

Ali Al-hamadani

Membro da: 10/06/22

145 Reputazione

1 Guida realizzata

Distintivi: 1

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 13

Ultimi 30 Giorni: 49

Tutti i Tempi: 977