Aggiusta la tua roba Comunità Store

Eco X Gear LED Display Replacement

Introduzione

You will need a phillips head screw driver, needle nose pliers, solder, and a soldering iron to complete this task. Before opening the device, ensure that there is no power to avoid damaging the electronics or harming yourself.

Cosa ti serve

  1. Eco X Gear LED Display Replacement, Frame: passo 1, immagine 1 di 1

    • Disconnect any power source and/or turn off device.

    Modifica

  2. Eco X Gear LED Display Replacement: passo 2, immagine 1 di 1

    • Remove the 15 rubber plugs from the cavities using needle nose pliers.

    Modifica

  4. Eco X Gear LED Display Replacement: passo 3, immagine 1 di 1

    • Use a phillips head screwdriver to remove the fifteen 6.4mm screws.

    Modifica

  5. Eco X Gear LED Display Replacement: passo 4, immagine 1 di 1

    • Carefully separate the two sections of the frame.

    • Wires still connect the two sections. Be cautious to avoid damaging the wires, terminals, and electronics.

    Modifica

  6. Eco X Gear LED Display Replacement, LED Display: passo 5, immagine 1 di 1

    • Locate the terminals coming off of the backside of the LED lights. Cut the terminals to remove the light from the frame.

    Modifica

  7. Eco X Gear LED Display Replacement: passo 6, immagine 1 di 1

    • Insert the new LED light into the frame. Use the solder and soldering iron to reconnect the terminals to the new lights.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 1

Tutti i Tempi: 128