Aggiusta la tua roba Comunità Store

Eco X Gear Gasket Replacement

Introduzione

You will need a phillips head screw driver and needle nose pliers to complete this task. Before opening the device, ensure that there is no power to avoid damaging the electronics or harming yourself.

Cosa ti serve

  1. Eco X Gear Gasket Replacement, Frame: passo 1, immagine 1 di 1

    • Disconnect any power source and/or turn off device.

    Modifica

  2. Eco X Gear Gasket Replacement: passo 2, immagine 1 di 1

    • Remove the 15 rubber plugs from the cavities using needle nose pliers.

    Modifica

  4. Eco X Gear Gasket Replacement: passo 3, immagine 1 di 1

    • Use a phillips head screwdriver to remove the fifteen 6.4mm screws.

    Modifica

  5. Eco X Gear Gasket Replacement: passo 4, immagine 1 di 1

    • Carefully separate the two sections of the frame.

    • Wires still connect the two sections. Be cautious to avoid damaging the wires, terminals, and electronics.

    Modifica

  6. Eco X Gear Gasket Replacement, Gasket: passo 5, immagine 1 di 1

    • Inspect the gasket around the perimeter of the frame. Remove the gasket using your fingers or needle nose pliers.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 4

Tutti i Tempi: 118