Salta al contenuto principale

Introduzione

The Cyclone will need replacement if broken. There are multiple mechanisms in place to make access to the Cyclone easy.

  1. First, make sure the device is unplugged and detach the wand from the main unit. Pull the bin release trigger.
    • First, make sure the device is unplugged and detach the wand from the main unit.

    • Pull the bin release trigger.

    • Some force is required to slowly pull the trigger up. lift the Cyclone until it stops.

  2. While holding the disposal tab, press on the red button within the device. Continue to lift up with red button held until cyclone is removed. Make sure the bottom of the bin opens when the Cyclone is removed
    • While holding the disposal tab, press on the red button within the device.

    • Continue to lift up with red button held until cyclone is removed.

    • Make sure the bottom of the bin opens when the Cyclone is removed

  3. Pull the pre-filter up by the knob. Pull the pre-filter up by the knob.
    • Pull the pre-filter up by the knob.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 4 persone hanno completato questa guida.

Jesse Coward

Membro da: 30/10/2017

197 Reputazione

1 Guida realizzata

Team

UW Tacoma, Team S1-G5, Rose Fall 2017 Membro di UW Tacoma, Team S1-G5, Rose Fall 2017

UWT-ROSE-F17S1G5

4 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 11

Ultimi 30 Giorni: 43

Tutti i Tempi: 4,456