Aggiusta la tua roba Comunità Store

Dyson DC56 Attachments Replacement

Introduzione

The attachment holder is important to keep the attachment steady while using the vacuum. Without a proper way to hold attachments the vacuum can become unusable.

Cosa ti serve

  1. Dyson DC56 Attachments Replacement, Dust Bin: passo 1, immagine 1 di 1

    • Make sure the vacuum is unplugged.

    • Warning: Avoid pressing the red trigger because it will turn on and begin suction.

    Modifica

  2. Dyson DC56 Attachments Replacement: passo 2, immagine 1 di 1

    • Locate the purple button at the top of the device.

    Modifica

  3. Dyson DC56 Attachments Replacement: passo 3, immagine 1 di 1

    • Separate the device with the purple button.

    Modifica

  4. Dyson DC56 Attachments Replacement: passo 4, immagine 1 di 1

    • Locate the dust bin's red release lever on the side of the device.

    • Make sure if the dust bin is full you open the vacuum over a trash can.

    Modifica

  6. Dyson DC56 Attachments Replacement: passo 5, immagine 1 di 1

    • Push the red lever to release the dust bin lid.

    Modifica

  7. Dyson DC56 Attachments Replacement: passo 6, immagine 1 di 1

    • Locate the red lever below the vacuum.

    Modifica

  8. Dyson DC56 Attachments Replacement: passo 7, immagine 1 di 1

    • Push the red lever, pull the back up and away from the dust bin to separate them.

    Modifica

  9. Dyson DC56 Attachments Replacement, Attachments: passo 8, immagine 1 di 1

    • Locate two screws at the back of the attachment holder.

    Modifica

  10. Dyson DC56 Attachments Replacement: passo 9, immagine 1 di 1

    • Use a T8-Torque screwdriver to take out the two 26mm screws out.

    Modifica

  11. Dyson DC56 Attachments Replacement: passo 10, immagine 1 di 1

    • Loosen the attachment holder by using a metal spudger.

    Modifica

  12. Dyson DC56 Attachments Replacement: passo 11, immagine 1 di 1

    • Remove the attachment holder.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 4 altri collaboratori

John Czerkawski

Membro da: 10/02/17

427 Reputazione

4 Guide realizzate

Distintivi: 7

+4 altri distintivi

Team

USF Tampa, Team S10-G1, Thompson Fall 2017 Membro di USF Tampa, Team S10-G1, Thompson Fall 2017

USFT-THOMPSON-F17S10G1

4 Membri

11 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 6

Tutti i Tempi: 764