Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lay the vacuum on its top so that the brush bar faces you.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a quarter, turn the three soleplate fasteners 90 degrees to the left.
-
Holding the soleplate on both sides, tilt it down and away from the vacuum.
-
Remove the soleplate from the vacuum.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Turn down the squared tabs on the brushbar so that they face outward.
-
Use a screwdriver to pry the belt up from the brushbar.
-
While holding the belt, pull the brushbar to the left and remove it from the vacuum.
-
Annulla: non ho completato questa guida.
Altre 13 persone hanno completato questa guida.
16 Commenti
RE-insert brush bar? You mean insert new brush bar? (Not reinsert the old one like in the picture because after all this is instructions for replacing the brush bar right?) Aakkk!
At the bottom it says "to reassemble follow these instructions backwards"...something like that.
Excuse me I have to scream now.
Thanks, I got you and I know what you meant. Thanks for taking the time to help others.